Nissan Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
796 Posts
Take off the hose from the pump and blow air through the hose. I have done this on a couple of cars. Either dirt or car wax will plug them. If that don't work check to see if you have voltage at the washer pump while hitting the washer controls. If you have voltage at the washer pump harness connector, replace the pump. If you have jumper wires, you can put 12v power from your battery directly to the pump and see if you can hear the pump working to verify. Hope this helps.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top