Nissan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1


From the Project SE-R Turbo (B13), I don't know what this is, and where exactly it's coming from. I see the exhaust, cat, resonator, so where does this connect between? Thanks.

Ppeace
CMo
 

·
Registered
Joined
·
354 Posts
if you are talking about the thing that looks like "braided line" then you would be looking at the "flex pipe". it is there to let the engine move without disturbing the exhaust piping(too much). if it was not there then while you were driving and steped on the brakes or are accelerating from a stop then your entire exhaust would "rock" back and forth with the engine and you would eventually have a leaking exhaust donut or exhaust manifold.

hope this answers your question
 

·
Registered
Joined
·
117 Posts
Discussion Starter #3
Oh, I see. Answers my question just fine. So it goes after the headers? Then to the cat (if you have one)? So when I upgrade to Hotshot and get random cat, I'll need to weld on a flex pipe in-between? Thanks

Ppeace
CMo
 
1 - 5 of 5 Posts
Top