Nissan Forum banner

Valve Cover Gasket Part #'s

Jump to Latest Follow

1 - 6 of 6 Posts
W

·
Guest
Joined
·
0 Posts
Discussion Starter • #1 •
Does anyone know the part numbers for the valve cover gasket and the spark plug gaskets? I am getting different part numbers for each in the se-r list archives. This is for a 97 if that makes a difference? Thanks!
 
S

·
Registered
Joined
·
79 Posts
#2 •
I just picked up a VC gasket for my 92 (it's the same) from Baker for 22 bucks.. not only did it come with the spark plug gaskets, but also all the washers and grommets for the 12 or so mounting points. Basically everything on VC gets replaced in this kit. I can get you the part number for that if you want and their phone number.
 
W

·
Guest
Joined
·
0 Posts
Discussion Starter • #4 •
Yeah, if you could, that would be great. Someone on the sr20 forums just posted the part numbers, so I'll post them here in case anyone ever needs them. PM me with the number or just post it here :) Thank you!

Nissan OEM gaskets:
Valve Cover Gasket: 13270-53J05
Spark Plug Gaskets: 13271-53J02
Oil Seal: 38342-8E002
 
S

·
Guest
Joined
·
0 Posts
Discussion Starter • #6 • (Edited)
Edit: Sorry guys I was about the post the part number for the exhaust header gasket by mistake. The slip only showed "gasket".
 
1 - 6 of 6 Posts
Recommended Reading
Read More

  1. QG18DE Tuning Guide and MODS list

    QG18 1.8L Engine
    QG18DE Naturally Aspirated Tuning: Keep in mind, while upgrading your QG18DE powered car with naturally aspirated parts, the power gains will not be substantial, and it will cost a significant amount to get some decent power in naturallly aspirated form. For the stock QG18DE, the best bang for...

  2. OX Sensor B1S2 question 2002 GXE ulev

    QG18 1.8L Engine
    Hi i bought a used 2002 Sentra GXE WITH CALIFORNIA EMISSIONS. The car was getting a P0138 , on a scan tool B1S2 showed a constant .300mv the corresponding short term fuel trim says N/A. I replaced the ox sensor and now it shows on the scanner O2 ready where before it was not. Is that...

  3. 02 Nissan Sentra GXE 1.8L

    QG18 1.8L Engine
    Hey all, I need some help. While driving to the gym my car started spuddering then shut off while driving. So I coasted to the parking lot since I was about to pull in, finished pushing it into the parking spot. Engine turns but won't start. Left it there, next day though, starts right up. The...

  5. Crank/no start after crank position sensor replacement

    QG18 1.8L Engine
    2004 Sentra 1.8. Was stalling while driving. Got code p0335. Replaced crankshaft position sensor and now it cranks but won't start. It was such a pain getting it out, but the replacement went right in and was loose until bolted, is this normal? Currently at a loss and ready to tow it to the...

  6. Weber carb setup on e16i?

    QG18 1.8L Engine
    I've got an 87 pulsar with the e16i. Came across locally an intake manifold with the carb for an 82/83 Sentra with an e15. Will this intake manifold fit my e16i head? I've done some looking but haven't really come across anything! If it'll work I'll snag up a Weber carb setup for it!
Read More
About this Discussion
5 Replies
2 Participants
Last post:
SERMitchell
Nissan Forum
Nissan Forums is the go to place to talk about your favorite Nissan model, including the Rogue, Maxima, Altima and even sports cars like the 370Z and 200SX.
Full Forum Listing
Explore Our Forums
B14 95-99 chassis General Discussion Pathfinder B13 91-94 chassis S13 240SX 1989-1994
Popular Communities
Community avatar for Home Improvement
Home Improvement
290,000+ members
Join
Community avatar for Home Entertainment
Home Entertainment
1,280,000+ members
Join
Top