Very cool, following!

 

The illumination is now working !
The V-CAN wires of the 40pin (2018) were connected to the wrong connector (2016).
In other words, the pin 21 (V CAN-H) and pin 41 (V CAN-L) must be connected to the pin 41 (CAN-H) and pin 42 (CAN-L) of the connector M77 (2016) found behind the odometer.

Here's the updated version:

As you can see, I updated my approach to power the rear camera, but I still can't make it work.
I don't really understand the pin 52 (camera detection) of the 32pin connector (2016). Is this wire positive or negative ? Is it important ?

If the 2018 radio had 360 camera, can it be a problem if my Nissan Rogue SV 2016 only have one rear camera ?

Thanks !

 

How's the research? Were you able to get the bird's eye working?

 

Yes ! To make it work, I had to buy and install the Nissan Camera-Control-Module (eBay ~70$). So to get the 360 view, I connected the camera (video signal and power) to the module, the module to the CAN, the Ignition wire to the module and connect to output video signal from the module to the Display-Unit. It wasn't working because the Display-Unit was waiting for a "acknowledge" signal from the module (CAN) on Reverse.

 

I have a 2015 and have tried to upgrade the software in the radio only to be told that even our local Nissan dealer doesn't like to mess with the '15 or '16. It's expensive and doesn't always work. I would love to be able to upgrade our map and have Android Auto with all the functions we currently enjoy. Did you make your own cable or spade connect the wires? If you have any more pics, please post them and thank you!

 

I'm also curious as to how new of a radio I could put in a 2015 Nissan Rogue SL with your wiring mods.

 

I did everything myself. So I ordered the connectors on AliExpress. Here's the Camera-Control-Module (2018) pinout if ever someone needs it :

 

Do you have a link to the AliExpress connectors? Or a screen grab?

 

The 20 pin connector can be found easily on Amazon. I made a complete Wiring Harness so that I can put my old radio with the original connectors if ever I needed to revert (ex: warranty).

 

Great idea! Enjoy the new to you radio! Thank you for the idea and seeing it through and posting it.

 

I have a 2014 Nissan Rogue S. Is there any way for me to do this too?

 

I am curious I am getting an old 2018 Nissan Rogue radio system on marketplace. My 2016 Nissan Rogue SV is equipped with 360 camera, Navigation touchscreen size and i think almost as same as 2018 instead of Apple carplay/ Android auto and Bose speakers. How I am able to install the radio system in my car? Any suggestions?? Do i also need to change the Pin connectors?