Nissan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,220 Posts
look at your axle code on the dr. door jamb, should be HGXX, you have a H233B axle, the wires to the front of the pinion are for the antilock brake sensor. look for the same axle code in a HB or pathy. C200, H190 and H233 are not swappable, the H233 is the strongest of the 3.

looks like they had something hit that was in the bed and just replaced the bed or while the bed was off.
 

·
Registered
Joined
·
2,220 Posts
other axles will swap, pathys with 4-link will not. you will have to take the leaf perches off the old axle and weld them on the donor axle. be sure to match the #s for the gears if its 4WD, otherwise the lower the # the lower the RPMs at highway speeds, the higher the # the higher the RPMs.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top