Nissan Forum banner
1 - 1 of 2 Posts

· Will work for beer
3,200 Posts
Yes, they'll fit, but you have to swap the front wheel hubs too. The axles are slightly larger in diameter than yours.
I've also heard the carrier bearing bracket on the back of the engine must be replaced..
There's some small wiring issues that need taken care of as well (plugs are different), but otherwise it's a direct swap.. bolt patterns are the same and you can use the same clutch and flywheel.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.