[Junk]

i was just wondering if the valve cover gasket screws need ot be tourqued after i replace the valve cover gasket and if so what should they be ?

 

[lshadoff]

The bolts should be tightened to 69-87 in-lb (NOT FT-LB) in the correct order:

Center first
Then opposite corners starting near the distributor
Then the 4 central bolts in a circular pattern
Then the two towards the front
Then the remaining bolt to the other side of the distributor.

Lew

 

[sunnysentra]

do the order, but how to torque screws? I just hand tightened the screws in the seqence in the manual. remmeber to use the RTV around the distributor spots as it shows in the manual.
Chris 92 classic