Nissan Forum banner
1 - 1 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Im replacing my headgasket on my 87 Pickup..i know i let the chain slip down a little when i took the sprocket off the cam, so know for a fact the tensioner has to be reset, but not sure if it completely fell apart or if i could do what one guy did on here with a long wood drill bit and push the tensioner back..i have taken the head all the way off and cleaned the area for the new gasket but i thought for a try, see if i can get the sprocket back on..with some effort and prying the sprocket up with the chain on it, i can get it back on the cam when i dont have the gasket on or bolted down the head.. so how would i know if the timing chain tensioner fell apart?....another question, how would i get the crank bolt loose with an automatic transmission?..i cant think of any ideas on what to try to get that bolt loose..
sorry for the long story..
 
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top