Nissan Forum banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
OK.......i got my clutch changed and then put on my stillen g-load i have a wierd noise that sounds like a bolt pulling out of the threads.......i put it up the other day at work and found three out of the four sway bar bolt holes were stripped and other bolts just jammed in.....well it didnt make the noise til i tightened up the front end w/ the g-load bar....then it i assumed it was either the bolts you need to remove and reinstall for the g-load bar or the stripped sway bar i re-tapped the bolt holes and replaced the bolts and then made sure everything was tight that i removed/reinstalled for the g-load you guys have any ideas what it might be??? Im going to put it up tomorrow and check to make sure everything else is tight under my if you have any ideas....let me know......thanks again!!!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.