Nissan Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
So after reading the definitive guide to advance timing I decided to try it on my B14 only to find out that there are two sensors in the throttle body. Can anyone tell me which sensor to pull? Not to mention, when i tryed looking for the degree marks by the crank pulley I couldnt see anything. Help please?
 

·
Registered
Joined
·
734 Posts
you need to find the TPS on the throttle body. then take a bottle of white out and mark your timing marks and let dry. look more closely at the pictures in the guide to adjust timing. I know your intake is different, but not that much.
 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,290 Posts
 

·
Registered
Joined
·
734 Posts
you should see 6 marks on the crank pulley. check the guide for a picture. your pulley may be dirty, making it hard to see the marks.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top