Nissan Forum banner
1 - 7 of 7 Posts

·
Not Anymore.
Joined
·
5,014 Posts
are you willing to spend money and either A) get a good shop to do the work or B) learn a lot as turbos are VERY complex? if so, turbocharging an sr20 is a very rewarding experience?
 

·
Think outside "The Box"
Joined
·
250 Posts
Were being harsh cause when you start pulling your exhaust out and installing the turbo one, thats the easy part. Put turbo in, install pressure line, install large oil return line, plumb intake tube, blumb wastegate into exhaust pipe(bich), install BOV, install air meter, install modded ECU, adjust timing, boost timing master, injectors, fuel pump, fuel line, intercooler (optional but recommended), water injection (over 8psi boost for hot engine also), oil cooler. Plus along other things. Just grab an SR20DET if you are alittle hesitant for experimentation.
 

·
Think outside "The Box"
Joined
·
250 Posts
Its just not as easy to drop in and go.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top