Nissan Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Has anyone installed one and do you need any special adapters>I want to install one in my 1990 HB Kingcab 4 cyl mt
 

·
Registered
Joined
·
59 Posts
No, you dont need any adapters. You just gotta splice into the wiring. Why would you wanna do that anyway? The stock tachs are pretty accurate, and your truck already has the wring for it. Its plug and play there. Plus, you wont look like a ricer with a huge tach mounted on the dash.:loser:
 

·
Registered
Joined
·
36 Posts
Some trucks, like my 1991 MT 2.4L have no tach installed from the factory. When installed my tach, I had to splice wires to the ECU. I think I have a thread on here about it.
 

·
Registered
Joined
·
59 Posts

·
Registered
Joined
·
59 Posts
All of the HBs have the same wiring harness for all the models. Non tach models have a plug behind the cluster for the tach cluster. Its not labeled but its there.
 

·
Registered
Joined
·
59 Posts
not sure right of hand, im thinkin its an 8 prong green plug, but im not sure. its been a while since ive been in the dash of an hb
 
1 - 9 of 9 Posts
Top