Nissan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
How long does it take to change a head gasket in a ka24de and what needs to be done thxs once again sry if its a repost
 

·
Registered
Joined
·
139 Posts
240droptop said:
How long does it take to change a head gasket in a ka24de and what needs to be done thxs once again sry if its a repost
It can be done in less than a day if you have done it before. Im not exactly sure on how long it takes as in hours.

You can easily find a 91-94 s13 KA24DE downloadable manual on the internet and that will tell you ALL you need to do when you change the headgasket.
 

·
KA24DET
Joined
·
1,000 Posts
S14240SR said:
It can be done in less than a day if you have done it before. Im not exactly sure on how long it takes as in hours.

You can easily find a 91-94 s13 KA24DE downloadable manual on the internet and that will tell you ALL you need to do when you change the headgasket.
It's not fun. You have to strip apart the engine, replace the gasket, reassemble top end, and then retime it.
 

·
Nissan Junkie
Joined
·
917 Posts
As with any headgasket paitence and planning if you put the engine to tdc 1 and mark the crap out of the distributor and rotor then timming it should not be a big pain. Remember to have the head machined and check to see if the headbolts are stretch to fit think they are and they are not reusable if they are. I would surmize that if you have everything it would take a weekend cause you have to wait on the machine shop never put a head back on unless you machine it just a waste of time.
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #5 ·
k thxsfor the advice guys I'm guna read the manueal a download over and over again this is guna be fun lol
 
1 - 6 of 6 Posts
Top