you should be able to find more on this at sr20forums with and without the dash.
My understanding is that this will swap out a SR20 engine or you can swap only the head with an oil feed and a controller for the cam switchover points.
You can keep your stock 5spd from an sr20de use youre flywheel and bolts from you 5spd and attach them to sr20ve. Next before you put the motor in swap the sensors form your sr20de to the VE. Then drop the engine in and use your stock harness to connect to your old sensors. Lastly buy an MSD 8969 and wire it in you can google search for Instructions on how to wire it up. Then set your timing at 15* and use 93 octane fuel till you can get a real tune and enjoy!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.