Nissan Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi, I am just about to purchase cams but have a few concerns about my setup because its a bit odd.

I am running a S13 block with S15 head, and within the head VTC is going to be deleted and replaced with S13 cam gears. Because I don't need oil pressure to operate VTC anymore, should I go with S13 cams in the head? I have read that S15 cams are offset by 10 degrees for VTC, but with theS13 cams and gears this should not be an issue?

Thanks for any help
 

·
Admin and Sup Mod keeping the peace
Joined
·
8,183 Posts
The S13 cams are preferred because they have more lift and longer duration. The S15 cams were de-tuned to comply with federal emission standards. If you get the FWD cams, be aware of the short dowel pin on the exhaust cam which has to be removed and replaced with the longer RWD S13 cam dowel pin.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top