Nissan Forum banner

1 - 4 of 4 Posts

·
Boost anyone?
Joined
·
1,625 Posts
Discussion Starter #1
I have side markers on my car which are currently hooked up to the parking lights. I would like to know if it is possible to run them exactly like my corner lights and have the ability for them to stay on constant as well as blink when i put the turn signal. How can i wire this up. I believe there is only 2 wires (pos & neg)
 

·
what?
Joined
·
2,704 Posts
Well,
With only 2 wires you can get them to stay on, and blink with your signalls, just opposite. Meaning, plug the power to the parking lights feed, and the ground to the signal feed. now they will be on, and blink the opposite (on for off, and off for on) than your signalls.
Someone correct me if I'm wrong.

Seth
 

·
Boost anyone?
Joined
·
1,625 Posts
Discussion Starter #3
Its too late in the night to do it now but if someone reads this and knows for a fact it will work, please verify. Also if you know it doesnt work, please tell me so I dont short anything out.
 

·
Registered
Joined
·
390 Posts
thats correct. i have the same setup. actually it doesnt matter which wire you connect to the corners as long as its not the corner's ground wire. I should of demostrated mine at the 8-2 meet we had.
 
1 - 4 of 4 Posts
Top