Nissan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
485 Posts
Discussion Starter #1
OK so tonight I was driving and everything was running pretty good. I go to get on the highway and all the sudden the shifter goes into 1st,3rd, and 5th but goes an extra 3-4 inches father. Im talking like i turn the hazards on on accident when I shift into 3rd. Im waiting right now for the cat to cool down so I can get to the shifter linkage. Anyone have any ideas why this would happen?
 

·
800+ posts
Joined
·
822 Posts
Shift linkage support bar came unbolted? This happened to me while driving one day (cursed single screw), but all I could get was 2nd, 4th, and reverse. Most likely either your bushing is worn, or it just needs to be screwed back in place.
 

·
Registered
Joined
·
485 Posts
Discussion Starter #3
Yep pretty close. Ended up the shifter nuts had become loose. One fell off and the other was only on by a few threads. Was letting the shifter angle out of the linkage. Thanks.
 
1 - 3 of 3 Posts
Top