Nissan Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
aiight my shifters been wiggling, everytime im on a gear and i slow down the shifter jolts back and forth, where can i find good bushings for a good price and a place that will delivery within a week... and how many bushings do i need or are they mounts???


lil vinny
 

·
Registered
Joined
·
547 Posts
I want to know also. My shifts are getting kind of hard and I'm putting in a short shifter soon anyways. So anyone that can help either of us, I would thank you. Sorry if you thought I was here to help! :D
 

·
Registered
Joined
·
339 Posts
that happened to me once with my ex-B12 Sentra.... the problem was engine mounts.... actually the transaxle mount... and a loose-lost nut at the shifter under the car.
 

·
Registered
Joined
·
117 Posts
i posted the same question yesterday and the guys suggest motor mounts and shifter bushings. also, possibly clutch, as hassan says. Coo

Ppeace
CMo
 
P

·
Guest
Joined
·
0 Posts
have you unhooked your rear engine mount lately? ( bushings change, mount change, or clutch job? ) If you don't put locktight on the rear engine mount bolts when putting them back in, they are likely ( from experience ) to vibrate themselves loose. This causes the engine to be able to move more than it should, which could cause play in the shifter.
 

·
Registered
Joined
·
95 Posts
Discussion Starter #6
i actually changed my engin mounts, my rear mounts but like SergioCR said its the tranny mounts and the shifter bushings... where can i get a cheap price for them and a place where i can get it asap... is it easy to install??
 

·
Registered
Joined
·
339 Posts
SERialThreatz said:
i actually changed my engin mounts, my rear mounts but like SergioCR said its the tranny mounts and the shifter bushings... where can i get a cheap price for them and a place where i can get it asap... is it easy to install??
i think that www.placeracing.com has some nice engine mounts... or a nissan dealer somewhere... try not to use other supports than originals, i got one made here once and it was smaller with less rubber than the original one... it fits the car but maybe security or movement is compromised.
 
1 - 7 of 7 Posts
Top