Nissan Forum banner
1 - 1 of 1 Posts

· 1.6 Turbo Power
Joined
·
718 Posts
replace the rotors arent that hard, you just have to undo a couple bolts here and there. as for them being pressed, or resurfaced, it all depends on how much rotor surface you have left. the shop that will do it for you will know if they can resurface it or not. it has to be within spec otherwise they will not resurface it because it is illegal.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top