Nissan Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
383 Posts
I've done all belts on both my '98 4 cylinder and on a 2002 4 cylinder, both the same, so yours should be same as well. The AC and power steering belts are removed by loosening the nut in idler pulley center, then loosening the adjusting bolt. The alternator is loosened by loosening the lockbolt (points rearward, head to front of truck), loosening the adjusting bolt (points to driver side), and ALSO loosening the 14mm head bolt on the underside, then pushing the alternator towards the engine. I wrote in my repair book that these all take 12mm or 14mm wrenches.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top