Nissan Forum banner

Replacing head gasket, need help with the VTC sprocket

2K views 1 reply 2 participants last post by  lvandyke 
#1 ·
How did you guys get it to lock back and what hole did you stick the pin into. I can move the VTC with air pressure but I cant feel the hole that I am suppose to pin. Any tips or tricks?
 
#2 ·
on the face of the VTC at 9:00 (closest to the firewall) you'll see a small nitch in the face and a hole behind it half covered by the face plate. When the VTC rotates clockwise the half covered hole will rotate clockwise and you can put the small end of a allen wrench in it to hold it there. Duck tape the allen wrench in place and you' re good to go.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top