Nissan Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I bought some aftermarket racing seats that didn't come with brackets. I ordered some brackets off of Ebay, but they don't fit. Anyone have any experience in this area that would be able to point me in the right direction? Thanks.
 

·
j-lu
Joined
·
1,237 Posts
Jaxjags2100 said:
I bought some aftermarket racing seats that didn't come with brackets. I ordered some brackets off of Ebay, but they don't fit. Anyone have any experience in this area that would be able to point me in the right direction? Thanks.
What is the problem with the brackets?
What brand are ur seats?
 

·
Registered
Joined
·
45 Posts
The best way to have done it, is to get the Nismo Seats off ebay. Yea they are knockoffs, but looks hella better than stock and are cheap. Then you have to get the brackets. Most brakets off ebay only fit a certain type of seat. Even with the brakets i got, i still had to fabricate them a bit welding some stuff....sorry =/
 

·
j-lu
Joined
·
1,237 Posts
200sxCaNaDiaN said:
The best way to have done it, is to get the Nismo Seats off ebay. Yea they are knockoffs, but looks hella better than stock and are cheap. Then you have to get the brackets. Most brakets off ebay only fit a certain type of seat. Even with the brakets i got, i still had to fabricate them a bit welding some stuff....sorry =/
Drill new holes(brackets) ...that's it.
 

·
Nissan Expert
Joined
·
126 Posts
i bought a pair of those seats too and come to find out the brackets said they fit 200sx/240sx but 1 of the hole is short by about an inch and the other is about inch off from the side.they ONLY fit 240sx. i had to get custom made from a shop here cali called wedge industries it cost me $160 but the fit.there ph.#(562)633-1663
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #7 ·
Stock brackets won't fit. I found a company called WedgeEngineering someone suggested on another post. Wondering if it's the same as the Wedge Industries you mentioned earlier. They're located in Cali too. So you said the brackets you got from them fit perfectly?
 

·
I command you to SEARCH
Joined
·
2,748 Posts
Corbeau sells brackets/sliders for the B13/B14
You will still need to do some welding, unless you get Corbeau seats.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #9 ·
Well I picked up my seats off of Ebay, that's the dilemma.
 

·
j-lu
Joined
·
1,237 Posts
1CLNB14 said:
Corbeau sells brackets/sliders for the B13/B14
You will still need to do some welding, unless you get Corbeau seats.
Riht corbeua bracket only fit corbeau seats.If u have another brand of aftermarket seats u have to drill new holes..that was I did
 

·
Now w/20% More Magic
Joined
·
199 Posts
Its already been mentioned but just buy the corbeu seat brackets and redrill the holes that what I did not to hard
I had to lie saying that I had corbeu seats because they only sell brackets if you have there seats will not sell the bracket by itself
unless you find a dealer that can order them in for you else you lie to corbeu
 
1 - 13 of 13 Posts
Top