[rodentkj]

I'm replacing all 4 of my injectors this weekend. My question is... Does the gray cap on the end of the nozzle stay on or come off?

 

[James]

stay on, don't break them either.

 

[rodentkj]

I'm replacing all 4 of my injectors this weekend. My question is... Does the gray cap on the end of the nozzle stay on or come off?

Ok cool, that is what I thought.

One other question. I have scene mixed opinions on what to use to lube up the O-Rings before installing. Some say to use motor oil or Vaseline. Others say to wet everything down with unleaded gas then install.

Any comments?

 

[James]

I used vaseline. Never leaked. ROLL don't stretch the O rings over the injectors.

 

[rodentkj]

I used vaseline. Never leaked. ROLL don't stretch the O rings over the injectors.

Okay, thanks.

I guess my main concern was the vaseline plugging up the injector somehow.

 

[James]

Okay, thanks.

I guess my main concern was the vaseline plugging up the injector somehow.

just a light coat on the orings is enough... if you have excess dripping off of it... its too much.

 

[Skoodles]

hey that plastic sleve on the end if one of the 4 peices rapping over breaks off is it bad lol cuase one of mine is like that noticed it during rebuild

 

[rodentkj]

just a light coat on the orings is enough... if you have excess dripping off of it... its too much.

Do you put it on beofore you put the O-rings on the injector or after?

 

[wildmanee]

Doesn't that stuff eat up rubber like crazy? With the petroleum-based stuff in there?