Nissan Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 · (Edited)
Hey,

I am selling the parts off my SR20det and am curious what to sell them for.

I got flame mail by someone saying that I was "money hungry" because he offered me $400_au (about $300 u.s.) for the following parts.

ecu (sr20det manual computer)
turbo (t25) good condition with new gasket
injectors (4)
inlet manifauld
exhaust manifauld
dump pipe
front pipe
and all the stuff that you need to attach everything (brackets, bolts, etc.)

I rang the importers and they quoted me that they sell those parts for $1500_au ($1150_u.s.)

I would have taken half what the importers offered them to me for plus thrown in my front and dunp pipe (and possible the coils also).

I told him that the quoted prices are based on what the importers sell them for and to make me an offer based on a private sale, less the ECU as I dont have one (after knocking back his $300_u.s. offer for everything (including the ECU and loom!).

He wrote back calling me money hungry and told me he "can get the parts for...". I wrote back and told him good luck. Below is part of the email he sent me.

--->

* I can get a Brand New 3" stainless manifold AND dump pipe for under $500.
* the wiring loom and ecu I can get for less than $200.
* I can also get injectors for under $200 BRAND NEW.
* and the turbo and inlet I can get for under $600 and thats a new turbo.

That is $360_u.s. for brand new stainless manifauld and dump.
ECU and loom for $140_u.s.
Brand new injectors for $140_u.s.
A brand new T25 turbo and intake manifauld for $420_u.s.

What do you think?

Is he kidding or am I being unreasonable for expecting about 35% of what the importers sell them all for.

I would have taken $320_u.s. for everything (except ecu & loom) and he got pissed off and called me "money hungry".

Do you think I am or would that have been a good deal ?

I am seriously asking...

What do you think I should sell them for.

They are all stock parts, in good condition, and off an SR20det.

?
 

·
Registered
Joined
·
347 Posts
So, Are you selling from Ausi or NZ!? Shipping comes into play then.
U.S. $$$ All NEW
For an S and S mani with down pipe for the T25> $250
T25 fixed or variable vane> $400 - $600
370cc Injectors> $189 ( and I just bought another set pulled for Total $42 shipped to my door ).
The rest, I am not certain, so I would rather NOT guess.
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
?

As I stated I am only after an idea what to sell them for, therefore postage doesnt matter.

I also stated that they are used parts so new part prices are irrelevant to me.

If reply please state whether any prices are in U.S. oe AU dollars.

I am trying to get an idea what to sell the parts for. That is all.

Thankyou for any reply's that may be of help.

Regards.
 

·
Banned
Joined
·
4,308 Posts
well, if you were to just sell the engine whole you could possibly get a solid $2.5-3k (u.s. $)

but it seems you are parting it out, when you part something out you can charge more for each part as they are being bought by many differant buyers.
ecu (sr20det manual computer)
turbo (t25) good condition with new gasket
injectors (4)
inlet manifauld
exhaust manifauld
dump pipe
front pipe
and all the stuff that you need to attach everything (brackets, bolts, etc.)
$300 for all of that just dosent work! thats far to little money, from prices i have seen (but depending on the condition of the parts you have) i would say that $100 for each part listed is about fare.
 

·
Registered
Joined
·
1 Posts
what to sell your parts for

sexy180sexy said:
Hey,

I am selling the parts off my SR20det and am curious what to sell them for.

I got flame mail by someone saying that I was "money hungry" because he offered me $400_au (about $300 u.s.) for the following parts.

ecu (sr20det manual computer)
turbo (t25) good condition with new gasket
injectors (4)
inlet manifauld
exhaust manifauld
dump pipe
front pipe
and all the stuff that you need to attach everything (brackets, bolts, etc.)

I rang the importers and they quoted me that they sell those parts for $1500_au ($1150_u.s.)

I would have taken half what the importers offered them to me for plus thrown in my front and dunp pipe (and possible the coils also).

I told him that the quoted prices are based on what the importers sell them for and to make me an offer based on a private sale, less the ECU as I dont have one (after knocking back his $300_u.s. offer for everything (including the ECU and loom!).

He wrote back calling me money hungry and told me he "can get the parts for...". I wrote back and told him good luck. Below is part of the email he sent me.

--->

* I can get a Brand New 3" stainless manifold AND dump pipe for under $500.
* the wiring loom and ecu I can get for less than $200.
* I can also get injectors for under $200 BRAND NEW.
* and the turbo and inlet I can get for under $600 and thats a new turbo.

That is $360_u.s. for brand new stainless manifauld and dump.
ECU and loom for $140_u.s.
Brand new injectors for $140_u.s.
A brand new T25 turbo and intake manifauld for $420_u.s.

What do you think?

Is he kidding or am I being unreasonable for expecting about 35% of what the importers sell them all for.

I would have taken $320_u.s. for everything (except ecu & loom) and he got pissed off and called me "money hungry".

Do you think I am or would that have been a good deal ?

I am seriously asking...

What do you think I should sell them for.

They are all stock parts, in good condition, and off an SR20det.

?


dude don't even trip off a retard like that 300 bucks is an outrage I'd post em all and sell it for 700 OBO, that would be more then fair to me...
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #6 ·
Thanks all

I got them on ebay for $400 au ($300 u.s.) as a starting bid.

>Garrett T25 Turbo
>Intake and Exhaust Manifauld
>Plenium (Fuel Rail, Injectors, Etc.)
>3" Front/Dump Pipe (older type with scrape on bottom of front pipe but o.k.)
>Turbo Gasket
>"Connector Pipe" for Turbo (U turn silver short pipe that bolts straight to the turbo intake about 15cm long turn)

I have them listed for another 3 days so I hope they sell for a decent price.

If they sell for $550 ($400) I will be sorta satisfied as that is half what the importers quoted me.

Thanks for the replys and emails. They have eased my mind about the email stating that I was "money hungry".

The bloke who sent me the flame mail said he can get a brand new turbo and manifauld for $400 u.s. but I think he is just used to seeing rip-off ebay scammers who never send the stuff. My turbo retails new at $2,100 u.s.

Anyways, again thanks and happy drifting.

Jay.
 
1 - 6 of 6 Posts
Top