Nissan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi, i've just bought a nissan pulsar 1988 with a ca18de in it and the probleme is that the engine is runing on 2 cylinders only (the 1 and the 3). I've checked the fire in the 2 and 4 coils and it sparks so i got fire in all cylinders.
I've checked the injectors from the 2 and 4 and they where dry so i've interswitch the injectors 1 and 2 and the engine was working the same. So i know that the injectors are good and that they are not the probleme. From now i dont know what i could check, maybe the resistor for injector ? I have seen somewhere else that the injectors on a ca18de works in pair.

Can someone help me pls ??

thx
 

·
Registered
Joined
·
734 Posts
dont leave out the valves. it could a burnt valve or a warped valve.
 

·
Registered
Joined
·
293 Posts
Check the wires in each injector, it should have 12V on one side with ignition on, and the other side will pulse to ground as you crank it. Least this is how the ca18det does.
 
1 - 3 of 3 Posts
Top