Nissan Forum banner

1 - 20 of 59 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
My homeboy has a jap 1.6 with a dirty WAI,Headders,exhaust,stock piping,a dug out CAT and an 17inch
focals and he ran a 16.8 at Moroso. Anyone got anything better?

Plus he tops out a 120 mph,and what?

Holla
 

·
freakish poster
Joined
·
1,236 Posts
Actually that's not so great. A stock '92 1.6 (E) does it in 16.7.
 

·
Administrator
Joined
·
1,075 Posts
I think the quickest I've heard of is around 15.5. Mike Young's is probably quicker than that. You can see a list at sentra.net.
 

·
Registered
Joined
·
46 Posts
Discussion Starter #4
It might but not on 17 INCH RIMS
 

·
Registered
Joined
·
500 Posts
God, I hope so.

What do you run chef? Post some times on that mammoth beast you have there and give us GA16 guys something to look forward to.
 

·
Banned
Joined
·
1,530 Posts
I do believe the name Michael Young comes to mind when I think of fast 1.6's. That's the car to compare to.
 

·
Registered
Joined
·
99 Posts
My best quarter mile time on my turbo 1.6L is 13.8 @ 106mph. I have also juiced my turbo 1.6L but I won't release those times yet :D
 

·
Registered
Joined
·
99 Posts
I was holding back from letting everyone know because I wanted to replicate if not do better with a drag 1.6L I have started working on. Well, here are my times, the only thing about this is that I melted my spare motor but I ran 12.7 @ 113mph, 60' => 2.027.
 

·
Banned
Joined
·
1,530 Posts
Ah......chef & Michael.....YOU SUCK!!! Just kidding. Now I'm REALLY not going to go to any strip and get a ¼mile time until I get a turbo in the little 1.6 of mine.

I can see it now....."and bringing up the rear with the slowest 1.6 time......Tim, with a time of 18.9......"

:D
 

·
Ive got a pickle 4 an arm
Joined
·
340 Posts
Timbo said:

I can see it now....."and bringing up the rear with the slowest 1.6 time......Tim, with a time of 18.9......"

:D
i'm probably slower then that. my auto classic does 0-60 in 12seconds:( (head timed)
my friends mom's stock auto PT cruiser kicks my car's ass. and those are reguarded as slow!

someday i will have my revenge with my car all neoed up.
 

·
Registered
Joined
·
299 Posts
My GA16DE went 14.71 @94mph with just a 50 shot of nitrous, K&N filter and straight through muffler. This was on 18 inch wheels. It now runs 15.60's on all motor with JWT cams, JWT ECU, Jwt clutch, UR pulley, UR aluminum flywheel, Extude Honed intake, RC engineering ported throttle body, Hotshot CAI and Hotshot Header with 2 inch mandrel exhaust system.
 

·
Registered
Joined
·
110 Posts
When is your car going to be featured in SCC again i want to know how it runs with port job
 

·
Registered
Joined
·
299 Posts
It ran the 15.6 with the ported intake and throttle body. It will be in the November issue. It will be about the Phantom grip limited slip, UR aluminum flywheel and JWT clutch.
 

·
Registered
Joined
·
63 Posts
chef said:
I was holding back from letting everyone know because I wanted to replicate if not do better with a drag 1.6L I have started working on. Well, here are my times, the only thing about this is that I melted my spare motor but I ran 12.7 @ 1
13mph, 60' => 2.027.

Wow! you the man. What type of turbo setup is this, the hotshot setup?
 

·
Registered
Joined
·
500 Posts
Negative. It's a custom built project he did on his own. If you dig in his profile this is his website:

http://www.gate.net/~amicomp/

Seems to me like quite an impressive setup, although last time I asked about the details either he didn't read my post or everyone just forgot about the thread. I don't know if it's on all-stock internals or if he built the engine first, as it doesn't really say on his website. That website looks rather old and I'm sure he's done other things to it, like putting it on the bottle for one.

If you're there, speak up. :)
 

·
Registered
Joined
·
63 Posts
It is indeed a very clean setup...I am afraid I would lack the expertise to piece together such rig, A kit is more like it, with the headaches already worked out, I could work with that. Thanks for the info

Russellc
 
1 - 20 of 59 Posts
Top