Joined
·
809 Posts
Hi, does anyone know the quality of OBX exaust? its almost as expensive as greddy. but when priced together with the headers, its roughly 600... just wondering.
OBX exaust question
Join the discussion
Recommended Reading
-
Water leak behind glove box (need help)
B14 95-99 chassisCheers, Need some help here! After a rainy day i found drops of water falling from behind glove box, in order to find the leak i took the garden hose and turn on the water for 15 minutes (and i gave the car a heavy bath) ... nothing happen, but when I started the car and drive for a while ...- 13
- 11K
-
intake air sensor
B14 95-99 chassisim trying to install an aftermarket part to my 96 Nissan altima. and i bought a shot ram intake. there isnt a place to put the air sensor. any adive on what i should do? thanks.- 2
- 256
-
Second gen VQ swap in 200sx
B14 95-99 chassisI am jumping into this VQ35HR 200sx swap pretty quickly just a couple things I am stumped on and looking for some opinions on motor mounts (I know I’m going to have to fabricate things) which tranny is best to use , which axles to run and any suggestions on wiring harness and ecu- 1
- 353
-
1998 200sx hazards not working
B14 95-99 chassisI have a 1998 Nissan 200sx and the hazards are not working. I’ve picked up multiple replacement hazard buttons and none work. The turn signals work and I also replaced the electronic flasher. I’m stumped, what could be the problem?- 1
- 390
-
Won't crank
B14 95-99 chassisI have a 1998 Nissan Sentra.i have put a new battery, starter, and alternator and it still will not turn over- 1
- 283
Join now to ask and comment!