Nissan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
:newbie:

Ok i just recieved an 95 nissan 200sx se with an 1.6l engine. i wanted to know what other engines would direct bolt into this chassis without any problems.

:newbie:
 

·
Apprentice Technician
Joined
·
784 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
ok so with just changing motor mounts is there anything else that would be required major like changing transmissions, axles...that type of thing...and if so what engines can fit into this car.....
 

·
Registered
Joined
·
173 Posts
Searching is your best friend... The 2.0 will swap in with some work and replacement (since it was an option). This swap has been asked about so many times, there should be plenty of threads on it. Read and learn on.
 

·
Apprentice Technician
Joined
·
784 Posts
ok so with just changing motor mounts is there anything else that would be required major like changing transmissions, axles...that type of thing...and if so what engines can fit into this car.....
the GA16DE is the top of the GA engine family. if you're going to do a swap, you need a full engine/tranny/mounts/axles/ecu/harness.
 
1 - 6 of 6 Posts
Top