Nissan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Ok...Im doing a SR20DET red top(the all wheel drive transmission) Swap into my 1997 200SX. I already have my ECU reflashed, and the stock 200 SX transmission bolted onto the DET engine. So my question is what if anything else do I need to do to the car/wiring harness to make it work with my car? If your not sure, where can I go to maybe read some write ups on how to perform this swap? Thanks in advance.
 

·
Biru O' Kudasai
Joined
·
1,426 Posts
I say it is an ambitious project which will require alot of fabrication but the Japanese N14 Pulsar GTi-R may be suitable for sourcing much of the driveline and suspension although it probably won't be a direct bolt in... Good Luck

Troy
 
1 - 2 of 2 Posts
Top