Hi,
i pulled two switches from a 1st gen pathy and i needed to see if anyone had a FSM or could look at their manual and tell me what the color coded wiring to each switch went to.
Here is a picture i found only of the 1st gen dash?? well if its not the 1st gen dash then to help give you an idea of where i got them from. I really couldnt make out the dash perfectly because the junk yard pathy (RIP) i found had a lot of the dash missing!!!
1st switch:
Security Switch with red led light. labeled (on/off - impact off): Has a total of 6 wires coming out of it:
1. Blue/green stripe
2. WHITE/BLACK STRIPE
3. RED/WHITE STRIPE
4. WHITE/BLACK STRIPE
5. PINK/BLACK STRIPE
6. PINK/BLUE STRIPE
2nd switch:
AUTO POWER (E-AT) SWITCH: I THINK i can figure this out one since its only 3 wires.
1. BLACK/WHITE STRIPE
2. SOLID BLACK
3. WHITE/BLACK STRIPE
It also has a red and black coming from the red led light, but thats of course is no problem.
what other pathy forums can i try to post this as well?? need all the help i can get??
Thanks so much,
- Jason
[email protected]
