[peter96]

If you get the front Courtesy bar and have ABS, let Brian know. There are two bar versions out there.
The GC plates will also give you more F travel, but you probably knew that since you mentioned them.
I think the reason Mike made the upper mounts for the rear only is that the rear is really lacking and would bottom even without lowering.

 

[peter96]

Both Ian L and I received bars that went straight across instead of forward and then over. Straight across is theoretically better, but the ABS bracket and connector box prevent it from fitting.
Brian has a different bar he is sending me. Hopefully one that will fit with GC camber plates.
Don't know the details, just what was sent me.

 

[peter96]

In terms of your GC camber plates I don't *THINK* STBs work with them

I was going by word of mouth and this
http://www.sentra.net/tech/garage/suspension.php?S=d72b6af8df97e5138ca009d0a115eeb6
If Eibach has stopped making a STB due to no sales and Courtesy has a new supplier or design, then you may soon be right about the plates and STBs.
Of course there is Shigspeed plates and a $tillen bar. I hear the $ bar is under $200 now

 

[peter96]

Eibach called them Pro-Control-Bars?
There's two sets of STB pics. The ones I'm referring to are the little green ones showing the GC plates installed. The caption is about the bars fitting with the plates.

So when are you getting the Almera? Is it going to be Yellow?

 

[peter96]

The pass side bracket isn't a full circle, its a moon shape with a cut out for that line.