Nissan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
good day sirs'.. i have a ga16de with cold air setup and now i want to add cams to it but can't find one for this type of engine.. i tried at jim wolfe but no cams are available.. by the way my location is in the Philippines.. any help would be appreciated.. thank you very much..
 

·
Registered
Joined
·
286 Posts
Your only option if you can't find used JWT cams is to get regrinds.

What is a regrind? Here is an informative ga16de regrind post:
GA16DE rally car article with engine build info

Someone in this thread found a good deal, $150 each at deltacam.com:
Regrind Cams (GB)

You would also need to get either new bigger shims, or double up on them in order for the regrinds to work. I think nissan charges $9 a shim and you need 16 of them. You can learn how to do it in the Haynes manual: end of chapter 1, Valve clearance and adjustment. That information is also in the field service manual which you can download here: Nissan Sentra Factory Service Manuals (FSM) Just download the 1994 sentra one, go to EM, and click the Valve Clearance button under GA.
 
1 - 2 of 2 Posts
Top