Usually people want to lower cars, rather than lift them, especially when it comes to Sentra. Since it has struts front and rear, I would thing adding spacers to the tops of the struts would be the easiest and cheapest way. However, you'll probably have to have them custom made, especially so in the rear. Then, depending on how much you want to lift it, you'll have to look at parts affected by installing spacers, i.e. the length of the brake hoses.
A metal fab shop that does CNC machining would be your best bet, but they'll need some specific information in order to create the parts. In other words, you need to design the part to be made. You'll also need longer studs or bolts, as applies, to make up the difference of the thickness of the spacer. If you can find someone that has done something similar, they can probably help you out with some good info, but you may be looking at a one-off project.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Nissan Forum
1.4M posts
175.2K members
Since 2002
Nissan Forums is the go to place to talk about your favorite Nissan model, including the Rogue, Maxima, Altima and even sports cars like the 370Z and 200SX.