Nissan Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
407 Posts
The knock sensor being bad or seeing a knock will automaticly pull 4 degs of timing on your motor. This is a fail safe to make sure you dont blow your motor. Check your knock sensor plugs the knock sensor plug is located to the right of the throttle body and the sensor itself is back between 3 and 4 cyls on the block on the intake side. check for ti being loose and all your connectors are good no bare wires etc etc. There is also a check in the FSM for checking your knock sensor. If it isnt that may be bad gas plugs or timing may be messed up
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top