Nissan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I just got into a front end collision and There is some rather significant damage to the driver side front end. Here is a link to flicker with the pics of damage. I would like to get your input on whether to fix it (either pay someone, or do it myself) or just junk the car.

Some other info about the car.
It's a 92 Sentra E. 4 speed with 118,000 miles. It still runs great and there is no mechanical problems. It still drives straight and turns fine. Other than the front end, the car is in perfect shape.

Thanks... :)

Flickr: reic1900's Photostream
 

·
Registered
Joined
·
734 Posts
looking at the damage i would say to fix it, its not too bad.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3 (Edited)
UPDATE: I just took a look under the hood and noticed the RH motor mount is cracked (check out flickr picture 002) So just another problem to deal with. If anyone has any suggestions on how to go about fixing any of this (esspiclly the bent radaiator support on the driver side), please let me know. Thanks!!!
 

·
Registered
Joined
·
734 Posts
heat and beat or cutout and replace. i have a extra motor mount if you need it let me know
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Yeah, I was thinking of flaming it and banging it out with a mallet. The other thing I was thinking of doing was using a tow rope and another car to put some forward pressure on it and bang it back into shape that way... Might be fun... Might NOT!

If you have a extra motor mount for the right hand side (92 Sentra 1.6L) That would be great!. You can e-mail me at [email protected]. Thanks!
 
1 - 5 of 5 Posts
Top