Nissan Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
Has anyone installed a JIC SF-1 setup on their 200SX? I know the valving isn't adjustable but the ride height is. These use a linear spring and not progressive. Also, the fronts come with adjustable camber plates and the rear, pillowball mounts. I've been quoted $1379 for the SF-1 and an additional $110 per pair of teather springs as an option. My other potion would be Motivational Engineering for $1440. Also, I've contacted TEIN and they were interested in using my vehicle to prototype a kit on it. I live in NJ so that won't happen, but one of you Cali guys should take this opportunity.
 

·
ex-Super *********
Joined
·
1,410 Posts
vrux,
Tein already has a kit that should work on your B14. After checking some part numbers, I belive their kits for the N15 should fit on a B14. Here is my reasoning.. Nismo offers the same damper/spring combo for the B14 and N15. Also I have seen quite a few pics of Sunnys(Sentra) with the HA kit on them. I have 2 qoutes for $1305 on the HA kit with pillowball(camber plate) mounts. As soon as I get the money I am going to buy the HA, we will know then If it fits.. Alos the HA has damper adjustibility as well as ride height.
 

·
Registered
Joined
·
70 Posts
Discussion Starter #3
That sounds interesting. The kit I actually spoke to them about was the SS coilover. I'll try to contact them again and see if I can get a confirmation on the N15 substitution.
 

·
Registered
Joined
·
126 Posts
Guys,

anything suspension-wise for a N15 will fit a B14.
Same way as anything for a N14 will fit a B13.
Those 2 platforms are 90% identical. It is only the exteriors that change.

Chris
 

·
ex-Super *********
Joined
·
1,410 Posts
nong,
The B14/N15 kit is not compatible with the EDFC(remote adjuster), the way I look at it, is that its a $300-$400 part that really is not that nessasary anyway.
 

·
Registered
Joined
·
46 Posts
PatScottAKA99XE said:
nong,
The B14/N15 kit is not compatible with the EDFC(remote adjuster), the way I look at it, is that its a $300-$400 part that really is not that nessasary anyway.
just something cool to have as a toy. I would pay for it if it's able to work. Maybe there is something someone could do to make it work? Thanks for the help.
 
1 - 7 of 7 Posts
Top