P
Project GTi-R
·Guest
Joined
·
0 Posts
does anyone know who jacob whitley is or how i can get in touch with him. i was told that he knows everything about wiring diagrams for nissan motors.
jacob whitley
Join the discussion
Recommended Reading
-
Water leak behind glove box (need help)
B14 95-99 chassisCheers, Need some help here! After a rainy day i found drops of water falling from behind glove box, in order to find the leak i took the garden hose and turn on the water for 15 minutes (and i gave the car a heavy bath) ... nothing happen, but when I started the car and drive for a while ...- 13
- 11K
-
intake air sensor
B14 95-99 chassisim trying to install an aftermarket part to my 96 Nissan altima. and i bought a shot ram intake. there isnt a place to put the air sensor. any adive on what i should do? thanks.- 2
- 257
-
Second gen VQ swap in 200sx
B14 95-99 chassisI am jumping into this VQ35HR 200sx swap pretty quickly just a couple things I am stumped on and looking for some opinions on motor mounts (I know I’m going to have to fabricate things) which tranny is best to use , which axles to run and any suggestions on wiring harness and ecu- 1
- 355
-
1998 200sx hazards not working
B14 95-99 chassisI have a 1998 Nissan 200sx and the hazards are not working. I’ve picked up multiple replacement hazard buttons and none work. The turn signals work and I also replaced the electronic flasher. I’m stumped, what could be the problem?- 1
- 390
-
Won't crank
B14 95-99 chassisI have a 1998 Nissan Sentra.i have put a new battery, starter, and alternator and it still will not turn over- 1
- 285
Join now to ask and comment!