Nissan Forum banner

ITB's on my 1992 hardbody

5234 Views 7 Replies 5 Participants Last post by  hardbodylover
I really want more power out of my truck, but I also need it to pass emissions. There doesnt seem to be many aftermarket parts for the truck ka24e, so i know there is alot of custom work involved. i want to maybe put individual throttle bodies on it, but still pass emissions. Is this possible?

If not, I would like to find out other ways to get more power. Mainly acceleration. I advanced the timing for a short time. that resulted in more torque, but killed my gas mileage. So i set it back to +2. If anyone has any ideas for more power that will pass virginia emissions, please let me know. getting raped by an si civic is motivating me to try for more. I was thinking of pulling both manifolds and port matching and polishing them.
1 - 2 of 8 Posts
WTF, why are you racing a SI Civic? there are alot of mods you can do, but this is a pickup not the most sleek looking veh out there. if you want to blow their doors off, throw in a bigger motor. otherwise look into putting a 240 intake on it, cam, header, etc.
there are quite a few available things to do to these engines, go here...



https://www.4x4parts.com/catalog/index.php?cPath=367
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top