Nissan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi my name is Dominic, and i own a 94 sentra and i want to swap the tired GA16DE out for a rebuild KA24DE from a altima with the tranny from it so my question is do i need the wiring harness from the altima for the motor to run proberly? i know that the mounts are all the same except for the tranny mount so i'll have to modify that but if i could get all the info i need to do this swap i would greatl appreciate it,


Thanks,
Dominic
 

·
Registered
Joined
·
19 Posts
You would also need an underdash harness a 240sx or an altima to attach to engine harness. You will also need new axels from an altima. The junkyard is the best bet for the underdash and the axels are pretty cheap. Good luck, thats a pretty sick swap.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top