Nissan Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
Hi!

I need this info for my compresion calculator but i not found this info:

- Combustion Chamber Volume. (cc per cylinder)
- Headgasket Thickness. (Thickness (in)
- Piston-to-Deck Height (Height (in)[negative value = out of the hole]


This topic is very important for me, GA lovers and the forum.

Thanks!
 

·
Registered
Joined
·
189 Posts
Discussion Starter · #2 ·
My friend help me with the combustion chamber and the result of the test is 34.08 cc's. I'm not very sure in this but is the result of my test.
Please help me with this!

Thanks!
 

·
Registered
Joined
·
189 Posts
Discussion Starter · #3 ·
This is the result of my test:

- Block (Bore mm) = 76.50mm
- Stroke (mm) = 88.00
- Head (Combustion Chamber Volume) (cc's per cylinder) = 34.08cc's
- Piston (Piston Dome Displacement) (cc per piston) = 1.5cc's
- Head gasket Thickness (Thickness (in) ) = In my test OEM head gasket comprimed 0.035"
- Piston-to-Deck Height (Height (in) 1mm = 0.03937 in) [negative value = out of the hole] = In my calculation is 0.002

COMPRESSION RATIO:- 11.9:1

Help with my calculations!

Thanks!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top