Nissan Forum banner
1 - 3 of 3 Posts

5 Posts
Discussion Starter · #1 · (Edited)
I have a 2002 SE-R and have installed a Pro-Start CT-3300 car starter a few months ago. Everything was fine and worked perfectly.

Yesterday my car wouldn't start (it was -22 in Toronto), so I had to get my car towed to the shop. They changed the oil and spark plugs and she started up with no problem. But when I left the shop, my power door locks stopped working. I tried using the key fob, it didn't work, i then tried from inside the car, and it didn't work either. The trunk release works from inside the car, and from the car-starter key fob, but not from the original Nissan key fobs. Also, it disabled my alarm...

I have checked all the fuses and everything seems ok, I took it back to the garage, and they say that they didn't touch anything, so it should be fine. I don't know what to do, and I don't want to pay someone to poke around.

Any thoughts or recommendations please?
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.