Nissan Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
i own 99 Nissan Sentra and im trying to install new head unit, but i don't know much about few things in it. so i was hoping if any of you have instructions on it with pictures. i have the deck kit and wires all i need is instructions

Thanks
RT
 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,288 Posts
What in particular ?
removing the old unit mechanically or the electrical wiring of the new unit ?
 

·
Registered
Joined
·
37 Posts
Discussion Starter · #3 ·
the stock one is still in there. and im still new to this type of thing so i guess both on how to remove mechanically, and the wiring for the new one. i found lots of instructions on it but none with pictures so i don't exactly know what im doing, and since im noobie at this i don't want to break or damage anything since i love this car. so it would help if it had some pics to explain it to me

Thank You
RT
 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,288 Posts
OK, I am about to pull my stock unit out and will take some pics for you.
maybe tonight, not sure.
 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,288 Posts
yes that's the plan, brought my camera to work will have a go at lunch time....
 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,288 Posts
Ok took the trim off and the units out....
tools for trim removal, trim tool and scraper with thin edge.....
now i remember you can pop out the piece between the top switches and remove the screw then it will pop out easier !!!



trim free from clips


clips




Remove screws to remove whole assembly with drink holder


remove screws to change single DIN or double DIN units

 

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,288 Posts
do you want more as i continue ?
wiring etc
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top