H&R springs?

1 - 2 of 2 Posts

StillenSpecV

Guest

Joined Jan 1, 1970

0 Posts

Discussion Starter • #1 • Sep 14, 2002

Anyone know where to get them?

Can't seem to find them anywhere, just Eibach and Sprint.

Thanks!

red SE-R

Registered

Joined Jun 23, 2002

172 Posts

#2 • Sep 16, 2002

they prolly don't have a set out just yet.
have to keep waiting

1 - 2 of 2 Posts

Join the discussion

Recommended Reading

06 Sentra SES light after changing alternator

B15 2000-2006

My car died the other day and it turned out the alternator was overcharging the battery. I changed the alternator and now it's running fine but the SES light is on. When I try to pull the code the light only flashes slowly 5 times and then stays solid, and I can't clear it. Any help would be...
- 0
- 52
- S
  Stinkyman360 · updated 23 hours ago
Nissan sentra temperature coolant sensor

B15 2000-2006

hi guys! can anyone help me with my sentra. I have a 2011 sentra 1.3 automatic trans. I have replaced my engine with an old model not sure if its 99, and the engine has no slot for temperature coolant sensor. so temp gauge on my dashboard is not working. what year model if B13 series that has no...
- 0
- 137
- seals · updated 9 days ago
throttle problems!!!! need help

B15 2000-2006

ok i have a 02 sentra 2.5l...car sat for a few mounths then when to start it, it had no throttle. found was a bad relay. changed it and was ok..drove for few days with no problems and now have another problem. i have no throttle. will start and idle but only have very little throttle. maybe not...
- 3
- 2K
- R
  RACINGB13 · updated 19 days ago
P0455

B15 2000-2006

I'm getting this code after replacing a Purge Solenoid Value near the firewall. I broke the nipple off the original and replaced it with one from a junk yard. Possibly the junk yard one is bad as I get this code. I see some on Ebay for $20 but they seem to be for a 2.5 SE-R, although they...
- 1
- 205
- P
  Paragons · updated 1 month ago
Clutch pedal problem

B15 2000-2006

Hi I bought a 2006 ser spec v about 3 months ago and as I’ve had it the clutch pedal feel has completely changed and eventually got to the point where shifting was hard and I couldn’t get into reverse. I replaced the slave and master cylinder and bled the system well. After this it worked great...
- 1
- 355
- Kerr9045 · updated 2 months ago