Nissan Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
i think i figured out my problem.I think the guy i got this car from put a 91 dash into my 89.the car did come with hud.I seen some place you could rewire it to work.but i need a digam or some know how.thanks........
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #2 ·
help me

i put a new speed sensor in didnt fix the prblom got a new dash in didnt help. now im out 200 bucks some one please help im getting fuckin pissed off
and about to go back to the good old hondas.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #5 ·
when i got the car it didnt work.but noticed once in a while itle come on then shut off in a second or two.only when it was hot out
 

·
LUCKY SLIDES 2 2/25/06
Joined
·
504 Posts
Shiversport said:
when i got the car it didnt work.but noticed once in a while itle come on then shut off in a second or two.only when it was hot out
guage as in the entire cluster would not come on but came on but shut off? correct me if i'm wrong. this seems more like the cluster has been removed and when it was put back in didnt get the plug inserted all the way in the outlet and if it has been securely plugged in there is an exposed wire or pinched wire that is preventing a complete circuit from happening

Don
 

·
LUCKY SLIDES 2 2/25/06
Joined
·
504 Posts
Shiversport said:
only the speedo would do this evreything else works just fine.
hmm maybe be the speed sensor on the tranny i believe not sure if thats where its at but i think it is

Don
 

·
Banned
Joined
·
1,899 Posts
If he got a gauge cluster from a DOHC and put it in an SOHC or vice versa, it will not work at all, ever.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #13 ·
well thanks for now butt i just ran into an even bigger problom my motor just went to hellllllll now i gotta find a new one. dam dam dam
 
1 - 14 of 14 Posts
Top