Nissan Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
Hi!
I need the GA16DE (gen 2) stock cams information, ex. duration & lift. I want create a custom cams but i need the stock duration and lift to create the cams for my aplication.

Thanks!

alfsentra
 

· Registered
Joined
·
189 Posts
Discussion Starter · #7 ·
The cam gears are the same, 91-94' / 95-99'

Wow! Intake lift vs. Exhaust lift. Very bad exhaust cam. :)

Intake: .342" valve lift - 208* duration @ .050"
Exhaust: .312" valve lift - 196* duration @ .050"

Lobe separation angle is 115.5* (static). It changes due to the variable cam timing during engine operation.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top