Nissan Forum banner

1 - 20 of 74 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
I have looked around a bit and could not find a GA16DE specific 1/4 mile thread. I think that it would be very nice to have that is only for GA16DE powered vehicles only.

Maybe it should like somethin like this:

(only for example)
Model: B14 sentra
Dyno: (if applicable)
Engine Mods: WAI, 2 /14 exhaust, lightened flywheel.
Suspension: AGX/tein s techs
60 ft: 2.4 sec
1/4 trap speed:79 mph
1/4 mile time: 16.7 sec

I dunno maybe something like this? Maybe a sticky in this section of the forum?
 

·
Registered
Joined
·
31 Posts
Model: N14 Pulsar
Dyno: 70kw atw
Engine Mods: CAI, 2" exhaust
Suspension: lowered
Tyres: 205/40/17 Sumitomo
60 ft: 2.6 sec
1/4 trap speed:81.32 mph
1/4 mile time: 16.7 sec

im confident i can improve ALOT. i have done a few more things since then. im going to run it next year when i get my license back
im 100%
 

·
Registered
Joined
·
16 Posts
Model: n14 pulsar
dyno: 103kw wheels
engine mods: custom camshafts, port polished head, 10.6:1 comp, valve springs, larger valves, forged pistons 80 thou overbore, peened rods, reground crank. Balanced + lightened.
suspension: lowered
wheels: 14 factory alloys
60ft: 2.34
1/4:15.8
mph: 82 ( with slipping clutch)
 

·
Registered
Joined
·
85 Posts
96 B14 200sx GA16DE
what's a dyno? lol
mods - hot shot header, cheap ebay intake, smc products sts, ur underdrive pulley - 50 shot
60' --- 2.221
1/4 --- 14.681
MPH --- 94.947
Weight - 2471 lbs


No bottle - 16.318 @ 86.74mph
 

·
Super Moderator
Joined
·
1,065 Posts
When i get my b13 sentra running good im taking it to the track cause the SE-R isnt getting the beating :) But i know the S4's would love to open up
 

·
Registered
Joined
·
189 Posts
My friend car...

- Sentra B-11 / Swap GA16DE 91'.
- E16 5 speed tranny.
- Modifications:
* High Flow air filter. (No CAI)
* Exhaust 2" (No header)
* Clutch Master stage 2 clutch.
* Ignition in 15'
* OML 10mm Sparks plugs and MSD Blaster SS coil.
* No A/C, P/S.
* 91 octane gas.
He's run 16.1 @ 83 mph.
 

·
Registered
Joined
·
19 Posts
sentra B14 GA15DE turbocharged TD05H turbo stock internals sr20 flywheel and clutch 8psi 148whp 370cc injector stock ecu AFC fuel controller 15:50 quater mile
 

·
Registered
Joined
·
13 Posts
This was the best run my car did at the 1/4 mile with slight slipage on the clutch and me 240lbs. It proved to me that these engines have lots of potential, if my clutch werent sliping i think it might of gotten a 16.8 in the 1/4. Beefing up the power to at least 140hp can have you running high 14 just my calculations.

Model: B13 sentra
Dyno: no
Engine Mods: stock
Suspension: stock
Reaction time: .335 (not so great just avg)
60 ft: 2.422
1/4 trap speed: 79.580
1/4 mile E.T: 17.1 sec
 
1 - 20 of 74 Posts
Top