Nissan Forum banner
1 - 3 of 3 Posts

· Registered
62 Posts
Discussion Starter · #1 ·
dont know if this is in the right place but i put a g20 ecu into my 99 se-l and did what i thought was right from jwt on unplugging some sensors. only thing i didnt do was change the wires on the harness(hadnt a clue how). so if anyone can i would like a pic of the evap pressure sensor and the absolute pressure sensor. thank you and if you swithched the wires please share how i do it. i unplugged what i thought was the right plugs switched the hoses and had crap for a idle. thanks for all the help. :cool:
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.