Nissan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I fitted new fuel injectors and seals to my ’94 D21 V6. I just reinstalled the fuel rails, I can see about 1mm of the seal after torquing the rail mounting bolts. Is that correct? I looked at the old seals and they do flare out at the top, so figure I am good, it is just that I expected the rails to sit flush with the head. I do not want to reinstall the plenum only to find I have fuel leaks.

Thanks!
 
1 - 3 of 3 Posts
Top