I have a newly rebuilt motor... new pistons, rods, crank, oil pump, water pump, head's ported and polished, 7.5lb Flywheel, 1.5lb crank pulley, Cold Air Intake, Pace Setter header, 2in straight pipe no resonator or cat, Magaflow muffler, Apex-I Super AFC (Air Flow Converter).
I've just ordered a fuel pressure regulator and was wondering what kinda PSI I should run...
My problem... as of right now.. it is running really rich.. and will hardly idle... and is on its face up until about 3500rpms and then it takes off... but when we were testing things we noticed when we squeezed the fuel line on the fuel rail it idled so hench the purchase of the fuel pressure regulator my question is; What kinda fuel pressure do you think I should run... with my current mod list...
I've just ordered a fuel pressure regulator and was wondering what kinda PSI I should run...
My problem... as of right now.. it is running really rich.. and will hardly idle... and is on its face up until about 3500rpms and then it takes off... but when we were testing things we noticed when we squeezed the fuel line on the fuel rail it idled so hench the purchase of the fuel pressure regulator my question is; What kinda fuel pressure do you think I should run... with my current mod list...