[penniless b12]

I have early 90's b12 4speed stick(the box) and i want to do a GA16DE or CA swap but I want to do the trans with it one shot deal can i put either in with their respective tranny or can I mix and match the trans and diff's

Also i didnt see much newer right ups but I got her rolling on a tokico-megan race setup with camber adjust bolts

 

[greenbean699]

If you are going to do a engine swap, you must use the same series tranny. such as CA, will be different than a GA tranny and so on.

 

[penniless b12]

So if I do decide to go with a CA18DE itll drop in with tranny thats what I really wanna know Id also have to switch out the cables too right?

 

[Campground Man]

Yes you have to switch out the clutch pedal and the cables both.

 

[greenbean699]

the ca18de is hydraulic, so it dont have a cable, but you will still need to swap out the pedals. be prepared when you do this swap, its not easy by any means.

lets hope you will have a donor car for a easier swap.

 

[Campground Man]

This is the description of me learning the hard way...


http://www.nissanforums.com/b11-b12-kn13-82-90-chassis/139709-ca18de-t-into-b12-clutch-untold.html